Screened Separable Connector (Touch Proof Joints)
Screened separable connectors or Touch proof joints or terminators have been designed for connecting single-core and three core polymeric cables to RMU, equipment using bushing types “C” that have been specified for 630A, 250A, & 400A up to 24KV, and switchgear. They are used for providing a touch-safe termination for polymeric cables along with the option of disconnection. The separable connectors are mainly used for doing power cable terminations on circuits and power systems that distribute HV-MV electricity at 66KV, 33KV, 11KV, and 6.6KV.
The Screened separable connectors are made up of top quality silicone or EPDM rubber and the protection of touch proof outer conductive screen which is connected to earth have also been provided. This design supports a broad application range of touch proof terminations along with incorporating steel cone and one body adaptors for covering all the cross-section from 25-300 sq mm.
Here are some of the main features of these separable connectors:
The connection provided by these separable connectors are submersible separable and fully screened.
These connectors come with a very compact design, lesser installation time, and fewer chances of errors.
These touch-proof joints come with unlimited shelf life if storage temperature remains normal.
With these touch-proof joints, there Is no need for any minimum phase clearance.
These screened separable connectors come with an outer layer that is semi-conductive along with the molded body of EPDM.
This cable jointing kit is very effortless to install along with comprehensive instructions that are included in every such type of kit.
These connectors are especially factory tested for AC withstand and partial discharge for ensuring the reliability rate of 100 percent.
This cable jointing kit uses a voltage class of 11KV, 15KV, and 24KV.
The separable connectors are easy to disconnect and reuse and there will be no need of moving MV-HV electrical equipment and all this is possible without the need for re-termination.
These connectors are weatherproof and safe to touch.
These joints are perfect for use on all polymeric screened cable types up to 42KV.
These connectors are perfect for connecting almost all types of polymeric insulators and insulated cables to equipment with C type plugs and bushings complying with EN 50180 and EN 50181.
These are perfect to merge or join with type A plugs and bushings complying with EN 50180 and EN 50181.